LED yeelenw bɛ ka manamana, u tɛ yeelen bɔ, walima u tɛ yeelen bɔ wa? Gɛlɛyaw ɲɛnabɔcogo ladilikan minnu ka kan ka dɔn

Ni LED yeelenw bɛ baara kɛ ni bolifɛntigi ye min bɛ se ka dimi, ko minnu bɛ kɛ i n’a fɔ u bɛ wuli, yeelen bɔli tɛ, walima yeelen dɔgɔyali, olu tɛ sɔrɔ tuma bɛɛ LED yeelenw yɛrɛ fɛ. Donna fanga, dimmable driver, output wiring, LED load, thermal conditions, ani control signals, olu bɛɛ bɛ se ka nɔ bila yeelen baarakɛcogo la.

Ka da Shengchang ka dɔnniya kan yeelenko porozɛw la, gɛlɛyaw ɲɛnabɔli ka kan ka daminɛ ni yeelen taamasiɲɛ yɛrɛ ye, o kɔfɛ, ka tɛmɛn donna, bɔli, doni, funteni ani kɔrɔsili cogoyaw fɛ senfɛ-senfɛ. Kuran fagali baara o baara walima tension caman sumani, o ka kan ka kɛ kuran baarakɛla ŋanaw fɛ.

1. LED yeelenw bɛ to ka yeelen bɔ

Flɛri waati ni a kɛcogo bɛ se ka gɛlɛyaw ɲɛnabɔcogo wɛrɛw jira.

01 | Flickering O yɔrɔnin bɛɛ Power-On kɔfɛ

Ni yeelenw y’a daminɛ ka wuli ni fanga donna dɔrɔn, aw bɛ fɔlɔ ka a lajɛ ni donna fanga sabatilen don.

O kɔ, aw bɛ dimmable driver output wiring ni LED load lajɛ. Aw ye aw janto jɛgɛnsira lafiyalenw na, ɲɔgɔnkanu juguw, bɔli surunw, doni girinya kojugu, walima doni bɛnbaliya.

Ni aw ye o ko ɲɛnabɔ, aw bɛ kuran don kokura ani ka a lajɛ ni a sɔgɔli bɛ jɔ.

02 | Flickering After Boli waati dɔ kɔnɔ

Ni lanpanw bɛ daminɛ cogo la nka u bɛ daminɛ ka yeli kɛ boli kɔfɛ waati dɔ kɔnɔ, kɛrɛnkɛrɛnnenya la ni funteni bɛ ka wuli, aw bɛ baarakɛcogo funteni ni a lakanani cogoya lajɛ.

Aw bɛ a sigiyɔrɔ, a lamini funteni ani funteni bɔli lajɛ. Ni baarakɛcogo funteni ka bon kojugu, aw bɛ funteni bɔli ɲɛ ani ka yeelen kɔlɔsi kokura.

Ni ko in tora, aw bɛ taa a fɛ ka bolifɛntigi ka bɔli ni LED baarakɛcogo lajɛ.

03 | Tuma bɛɛ 'Don → Off → On → Off'.

O misali bɛ se k’a jira ko bolifɛntigi min bɛ se ka dimi, o bɛ don siɲɛ caman lakanani sɛrɛkili dɔ kɔnɔ.

 

Ni cogoyaw i n’a fɔ bɔli surun walima doni caman bɛ to sen na, bolifɛntigi dɔw bɛ se ka don hiccup mode la: bɔli bɛ dabila, ka waati dɔ makɔnɔ, o kɔfɛ a bɛ daminɛ kokura ka segin o sɛgɛsɛgɛli kan.

Aw bɛ bɔli wiring ni LED doni lajɛ fɔlɔ. Lakanali ni a lasegincogo bɛ danfara ka kɛɲɛ ni fɛn dilannenw ye, o la aw ye furaw ɲɛfɔcogo lajɛ.

04 | Flickering Dɔrɔn Dimming waati

Ni sɔgɔsɔgɔninjɛ bɛ kɛ dimi waati dɔrɔn, aw bɛ aw sinsin a ɲɛminɛcogo kan.

Aw ye a lajɛ ni kunnafonisɛbɛn taamasiyɛn sabatilen don, ani ka dimi hakɛ, doni wajibiyalenw, ani bɛnkan sɛgɛsɛgɛ kunnafonidila, dimmable driver ani LED doni cɛ.

Ni kuran ni doni bɛ cogo la, aw bɛ kunnafoni dicogo ni a dimi fɛɛrɛ lajɛ.

2. LED yeelenw tɛ yeelen bɔ

Baara kɛ ni ɲɔgɔndan doncogo → bɔli → doni ye walasa ka gɛlɛya in dɔgɔya.

01 | Fitinɛw tɛ yeelen bɔ Kuran donni kɔfɛ

Fɔlɔ, aw bɛ dimmable driver input suman ani ka a jira ko sanfɛ kuran ni donna wiring bɛ normal.

O kɔ, aw bɛ bɔli wiring ni LED doni lajɛ ni u ma ɲɔgɔn sɔrɔ, ni u ma surunya, walima ni u doni ka ca. Aw bɛ ko in latilen ani ka kuran don kokura.

02 | Input Is Normal, nka Dimmable Driver tɛ Output sɔrɔ

Aw bɛ bolifɛntigi ka bɔli suman k’a ɲɛsin a ma walasa k’a dɔn ni bɔli tɛ yen tiɲɛ na.

Ni bɔli ma kɛ cogo la, aw bɛ a lajɛ ni kurukuruni, doni caya kojugu, walima funteni tɛmɛnen lakanani. Aw bɛ a lajɛ fana ni dimming control bɛ baara kɛ ka ɲɛ.

03 | Bɔli tɛ Bɔ kɛnɛma koɲɛw ɲɛnabɔlen kɔ

Aw ye a lajɛ ni dimmable driver donna latch mode kɔnɔ walima ni a donna lakana cogo wɛrɛ la.

Fɛn minnu bɛ ni latch mode ye, a ka c’a la, o fili ka kan ka bɔ sani bolifɛntigi ka se ka segin a cogo kɔrɔ la ka kɛɲɛ ni reset fɛɛrɛ kofɔlen ye.

Ni bolifɛntigi ka bɔli seginna a cogo kɔrɔ la nka lanpanw tora ka faga, aw bɛ LED doni ni a ka filiw lajɛ, hali kɔnɔna ɲɔgɔndanw ani bolifɛntigi ka ciriw minnu bɛ tali kɛ o la.

3. LED yeelenw bɛ kɛ Dimmer ye

Fɔlɔ k’a dɔn ni yeelenw bɛ fiyen kabini u daminɛ na walima ni u bɛ fiyen boli kɔfɛ. Gɛlɛyaw ɲɛnabɔcogo tɛ kelen ye ko kelen-kelen bɛɛ la.

01 | Yeelenw bɛ Dɔgɔya o yɔrɔnin bɛɛ Power-On kɔfɛ

A daminɛ ni jɛɲɔgɔnya ye donna, bɔli ani doni cɛ.

Aw bɛ donna tension suman ani ka a lajɛ ni dimmable driver bɔli voltage walima current bɛ normal range kɔnɔ. Aw ye a sɛgɛsɛgɛ ko LED doni bɛ bɛn bolifɛntigi ka jatew ma.

Ni fanga ni bɔli bɛ cogo la, aw bɛ dimming level, control signal ani dimming range lajɛ ni control settings ma bɛn.

02 | Yeelen bɛ Dɔgɔya dɔɔni dɔɔni Baara Kɛtuma na

Ni yeelen bɛ dɔgɔya ni baarakɛwaati bɛ caya, aw bɛ aw sinsin funteni kan.

Aw bɛ sofɛrɛ min bɛ se ka dimi ani LED yeelenw baarakɛcogo funteni lajɛ, ka fara u sigiyɔrɔ ni funteni bɔli cogoyaw kan.

Ni bolifɛntigi bɛ funteni dɔgɔyali dɛmɛ, aw bɛ funteni ni bɔli cogoya lajɛ walasa k’a dɔn ni funteni dɔgɔyali daminɛna. Funteni min bɛ don LED yeelenw na, o fana ka kan ka jateminɛ.

Aw bɛ funteni bɔli ɲɛ ani ka yeelen kɔlɔsi kokura.

03 | Yeelen walima Yɔrɔ dɔw dɔrɔn de bɛ kɛ dibi ye

Aw bɛ yeelen nɔgɔman ni yeelen min bananen don, aw bɛ o suma. Aw bɛ u fila bɛɛ doncogo, u bɔli, u ka filiw ani u doni cogoya lajɛ.

Aw ye aw janto kɛrɛnkɛrɛnnenya la wiring koɲɛw la, tension jigin, contact jugu, ani doni danfara.

Ni sofɛrɛ bɔli min bɛ se ka dimi, o bɛ cogo la nka yeelen kelen-kelen walima yɔrɔ kelen-kelenw bɛ to ka fiyen, aw bɛ kuran fiyɛli, tension min bɛ LED donna yɔrɔ la, LED doni, ani kɔnɔna jɛgɛnw lajɛ ka taa a fɛ.

O ko ɲɛnabɔlen kɔfɛ, aw bɛ kuran don kokura ani ka a lajɛ ni yeelen seginna a cogo kɔrɔ la.

Kuncɛli

LED gɛlɛyaw ɲɛnabɔli ka kan ka daminɛ waati min na ani cogo min na, o bɛ kɛ cogo min na, o kɔfɛ, ka tɛmɛn kuran sɔrɔyɔrɔ fɛ, bolifɛntigi min bɛ se ka dimi, ka tɛmɛ filiw fɛ, doni fɛ, funteni cogoyaw fɛ, ani kunnafoni-falen-falen sira fɛ senfɛ-senfɛ.

Ni aw ye bana taamasiɲɛ kɔfɛ cogoyaw dɔn ani ka sistɛmu yɔrɔ min bananen don, o bɛ se ka dɔ bɔ gɛlɛyaw ɲɛnabɔli kunntanw na ani ka yɔrɔw cili kɛ, o bɛ kɛ sababu ye ka filiw sɛgɛsɛgɛli kɛ ka ɲɛ.

Ni ko in tɛ se ka dɔn o sɛgɛsɛgɛliw kɔfɛ, aw bɛ taa Shengchang fɛɛrɛbɔjɛkulu fɛ walasa ka dɛmɛ wɛrɛw sɔrɔ.